More actions
m →The Config File: rephrase one sentence a bit |
No edit summary |
||
(8 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
'''TMInterface''' '''(TMI)''' is a public [[Trackmania]] [[Tool-Assisted Speedrun|TAS]] tool created by [[donadigo]]. TMI was programmed in C++ and then later on, added further support for plugins in AngelScript, which is also used for [[Openplanet]] in [[Trackmania 2020|Trackmania (2020)]] and [[Maniaplanet]]. Though before AngelScript was added to TMI, Python was used to make "Custom Scripts" for custom [[Bruteforce]] settings. Before TMI there was no publicly available [[Tool-Assisted Speedrun|TAS]] tool for [[Trackmania]], and still is the only public [[Tool-Assisted Speedrun|TAS]] tool. | '''TMInterface''' '''(TMI)''' is a public [[Trackmania]] [[Tool-Assisted Speedrun|TAS]] tool created by [[donadigo]]. TMI was programmed in C++ and then later on, added further support for plugins in AngelScript, which is also used for [[Openplanet]] in [[Trackmania 2020|Trackmania (2020)]] and [[Maniaplanet]]. Though before AngelScript was added to TMI, Python was used to make "Custom Scripts" for custom [[Bruteforce]] settings. Before TMI there was no publicly available [[Tool-Assisted Speedrun|TAS]] tool for [[Trackmania]], and still is the only public [[Tool-Assisted Speedrun|TAS]] tool. | ||
[[File:ificon.png|205px|thumb|right|TMInterface logo]] | |||
'''TMInterface''' requires further knowledge of how the tool behaves in the game and knowledge about [[Trackmania|Trackmania's]] [[Game Mechanics]], this can be anything from [[tick|Tickrate]] and [[Speedslide|Speedslides]], to [[Noseboost|Noseboosts]] and [[Uberbug|Uberbugs]]. This can be a daunting task to guide the tool to your own advantage, with features such as [[Bruteforce]]. | |||
'''TMInterface''' has actually some versatility when it comes to things other than [[Tool-Assisted Speedrun|TAS]], people can use '''TMInterface''' as a practice tool for [[Real-Time Attack|RTA]] runs, by copying inputs of a good start or a good setup for something, and then replaying them over and over again. This is a really great way to practice but not a lot of people do. | |||
==History== | ==History== | ||
Line 78: | Line 85: | ||
<pre>load filename.txt</pre> This command will load your '''filename.txt''' file and the game will read the inputs from that file. | <pre>load filename.txt</pre> This command will load your '''filename.txt''' file and the game will read the inputs from that file. | ||
<pre>unload</pre> Will unload the currently loaded file. | <pre>unload</pre> Will '''unload''' the currently loaded file. | ||
==Plugins== | |||
Another crucially important part of [[Tool-Assisted Speedrun|TASing]], is the use of '''plugins'''. Plugins are an important aspect when it comes to creating [[Tool-Assisted Speedrun|TAS]] runs, this is due to their usefulness and utility. With a good understanding of [[Bruteforce]], you can really get some good results out of plugins. The plugins can vary, since there is a lot of them that can be downloaded, anything from a nose position finder also known as '''Nosepos+''', to '''Incremental''', that is a combination of [[speedslide]], wall hug and input simplifier [[Bruteforce]]. | |||
There is probably hundreds of plugins by now and people keep creating new ones in order to make [[Tool-Assisted Speedrun|TASing]] easier. | |||
==The Config.txt File== | |||
The '''config.txt''' file | [[File:Config_file_directory.png|600px|thumb|right|File Location for the "Config file", its at the bottom of the TMInterface folder in this situation.]] | ||
'''The Config.txt file''' is a file that you can customize and save your binds, commands and settings. The '''config.txt''' file is located in Documents > TMinterface. Custom binds are specified in the text file to drastically increase the usage efficiency of the tool. | |||
----- | ----- |
Latest revision as of 12:23, 11 December 2024
TMInterface (TMI) is a public Trackmania TAS tool created by donadigo. TMI was programmed in C++ and then later on, added further support for plugins in AngelScript, which is also used for Openplanet in Trackmania (2020) and Maniaplanet. Though before AngelScript was added to TMI, Python was used to make "Custom Scripts" for custom Bruteforce settings. Before TMI there was no publicly available TAS tool for Trackmania, and still is the only public TAS tool.

TMInterface requires further knowledge of how the tool behaves in the game and knowledge about Trackmania's Game Mechanics, this can be anything from Tickrate and Speedslides, to Noseboosts and Uberbugs. This can be a daunting task to guide the tool to your own advantage, with features such as Bruteforce.
TMInterface has actually some versatility when it comes to things other than TAS, people can use TMInterface as a practice tool for RTA runs, by copying inputs of a good start or a good setup for something, and then replaying them over and over again. This is a really great way to practice but not a lot of people do.
History
TMI was started by donadigo around 2018, where it was initially just a simple long-term project. Later on in 2019, donadigo made a blog post about TAS and Trackmania, where he talks about TAS and its availability. Most TAS tools were privately owned and not shared, due to the risk of cheating, because back then there was no cheat detection. People with these tools never uploaded these runs on the offical leaderboards, but rather posted them as videos on youtube, to showcase their Tool-Assisted Speedruns.
After the events of the Cheating Scandal, donadigo published a cheat detection software, Competition Patch. Over the following months, it became mandatory to use in order to upload runs to the more prestigious tracks on TMX.
The first version of TMI was version 1.0.0, which was released shortly after the report about the Cheating Scandal, on the 30th of May 2021.
Version History
Below is the list of versions and their release dates for TMInterface:
- 2.1.1 - 2024-08-11
- 2.1.0 - 2024-06-10 - Modloader release
- 2.0.1 - 2023-09-14
- 2.0.0 - 2023-08-01 - AngelScript support added, replacing Python
- 1.4.3 - 2023-03-13
- 1.4.2 - 2023-02-24
- 1.4.1 - 2023-01-31
- 1.4.0 - 2023-01-28 - Big update with a bunch of added features
- 1.3.2 - 2022-09-27
- 1.3.1 - 2022-06-03
- 1.3.0 - 2022-06-01
- 1.2.0 - 2022-06-15
- 1.1.1 - 2022-04-07
- 1.1.0 - 2022-03-02
- 1.0.9 - 2021-12-23
- 1.0.8 - 2021-09-12
- 1.0.7 - 2021-07-30
- 1.0.6 - 2021-08-24
- 1.0.5 - 2021-06-15
- 1.0.4 - 2021-06-03
- 1.0.3 - 2021-06-03
- 1.0.2 - 2021-06-01
- 1.0.1 - 2021-06-01
- 1.0.0 - 2021-05-30 - TMI release
Commands & functions
Finish
Forcefully finishes the current race. Useful when you need to save the replay without finishing the map e.g: to retrieve the inputs. The command may be used in any race context and TMInterface will force the game to finish the current race.
Syntax & Example:
finish
Finishes the current race
Speed
You can control the speed of the game by typing the following command into the console:
set speed x
Or you can bind the command to a key:
bind a "set speed x"
This will make it so pressing the "a" key will run the "set speed x" command, effectively setting the game speed to x.
The value of the normal game speed is 1
Toggles
There is a bunch of toggles in TMI that you can activate to show useful information in a race, here is some of them here:
toggle_info
Will open a window that shows you the properties of the car, camera, real speed ect.
toggle_wheels
Will toggle a wheel display and show in what state each wheels is in, if its on grass, dirt, water, airborne ect.
toggle_inputs
Will toggle an input display and will display the inputs of the current loaded input file.
Saving & Loading files
There are many ways to save inputs from a run. Here are some of the commands:
recover_inputs
Will recover the inputs that were last played, this is useful when you try to mess around with a setup or something similar manually.
dump_inputs filename.txt
You can use this command after validating a replay to save it straight to a file, in this case it saves into the filename.txt file. Dumping inputs into a file that doesnt exist on your computer, will create a new file with the chosen name and it will be loaded instantly. If you dump into an already existing file, it will then overwrite that file.
Remember that you cannot grab inputs out of online replays using this method, instead get the autosave replay if possible.
Or else head to here: Tm TAS discord, and type /inputs and put the online replay there. Unfinished replays are impossible to grab inputs from.
load filename.txt
This command will load your filename.txt file and the game will read the inputs from that file.
unload
Will unload the currently loaded file.
Plugins
Another crucially important part of TASing, is the use of plugins. Plugins are an important aspect when it comes to creating TAS runs, this is due to their usefulness and utility. With a good understanding of Bruteforce, you can really get some good results out of plugins. The plugins can vary, since there is a lot of them that can be downloaded, anything from a nose position finder also known as Nosepos+, to Incremental, that is a combination of speedslide, wall hug and input simplifier Bruteforce.
There is probably hundreds of plugins by now and people keep creating new ones in order to make TASing easier.
The Config.txt File

The Config.txt file is a file that you can customize and save your binds, commands and settings. The config.txt file is located in Documents > TMinterface. Custom binds are specified in the text file to drastically increase the usage efficiency of the tool.
External Links
For further information about how to setup TMInterface and how to use it, go to this documentation: Igntul's TAS Tutorial Docs
For further documentation of TMInterface and its API, head to donadigo's website.